Acetylene plant Process Acetylene plants are manufactured with complete in-house know-how to produce acetylene gas. Every part has been carefully designed and inspected by experienced engineers. Each unit, after assembly, is charged and worked continuously to check its performance. You… Read More »How does an acetylene plant work
Acetylene forms an important part of many crucial processes in industries. Although the current uses of acetylene are few, the scope is not limited. In-depth research is being conducted in this regard to ensure utilization of this resource in the most beneficial manner possible. Acetylene is an important natural gas that is put to various uses
Our Acetylene Generator is a “Continuous Flow” type. When the carbide contents of the hopper are exhausted, (the other hopper automatically goes into operation, carrying the load) the empty hopper can be refilled during the time the gas in the generator is being used. In this way continuous service is maintained conveniently and safely. No shutdown operations at recharging period means that you save both labour and time. The Generator may be started or stopped as and when required.
The combination of oxygen and acetylene to cut metals has been in use since approximately 1906. Over the years, acetylene has earned a recognition as one of the safest, yet strongest welding gas. But, there is a rising misconception that propane is a better welding gas than acetylene. This post shares differences between these gases and discusses the benefits offered by acetylene gas in detail.
Carbide lime is a high quality hydrated lime slurry produced as a by-product of the generation of acetylene gas
It is produced as a 10% solids slurry and is stored in tanks, where the excess water is decanted to increase the solids content to the 30-40% range for distribution in 5000 gallon tank trucks.
Many methods to stop flashbacks have been devised. Broadly the Interruption Methods can classify the Flashback Arrestors into two types :
“Active” methods require maintenance of certain parameters, such as liquid level or gas velocity. “Passive” methods require only routine inspection and typically have no moving parts or instrument requirements.
reasons that may cause a flash back. Hot refractory causes a flash back If the refractory lining a burner or furnace is hot enough to bring the hydrocarbon/air mixture to the auto ignition temperature, rapid combustion will start. Heat transfer… Read More »Gas Flash Back & its causes
The flashback arrestor should be placed at the closest point to the flame, if due to unavoidable circumstances the Arrestor can not be places close to the cutting nozzle or the flame then it should be placed of the main pipe line, and also on the fuel gas bank, vessel, cylinder.
While many people may logically conclude that acetylene is stored in standard high-pressure cylinders which are hollow in construction and gas storage use, this point is not true. Acetylene cylinders are a separate, dedicated, and special type of cylinder that… Read More »Handling and Storing of Acetylene cylinders
When it comes to compressed gas products, many business owners and managers prefer buying new ones. Many times, this is due to a gap in their understanding of the benefits of the rebuilding process or even that rebuilt units are available. What are these benefits? What does a compressor rebuilding involve? This post discusses how a rebuilt acetylene gas compressor can be an asset to a business.